Tips For Fixing An HP 4200 Fuser Error Code

Recently, some of our users encountered an error message with an hp 4200 Fuser Error Code. This problem occurs for several reasons. Let’s look at them now. If a person sees error codes 50.5 on an HP LaserJet 4200, 4240, 4250, 4300, or 4350 series printer, the printer instruction manual in the installed fuser will be registered as a fuser, completely wrong for that printer model. If the wrong fuser is installed, your company may experience error 50.5 (or in some cases error 13.20) when turning on a new printer.

  • If you encounter a specific “50.2” crash error, please turn your device off and on again first. Sometimes the error disappears temporarily on reboot, allowing you to shop for a few more but more pages, usually the error reappears. If you moved the printer to another location a few months ago or recently installedbrand new fuser assembly, especially on the HP laserjet 4000, 4050, 4100, 4200, or 4300 series photo printers, you may want to check if the two tabs are open. on the fuser unit are peeled off (this may occur during transportation, heavy movement, or when the fusing unit is installed). See these tabs for more information.

    If you need to replace the fuser unit NOT recently, but the printer is shaking a lot in addition to the environment, fusing unit error 50.2, you may have a real fusing unit loss. be replaced. Fusers are consumables and are the main component of the new printer maintenance kit; We hope that you will replace the fusing unit or maintenance kit several times during the life of your machine. Click on this article to view a list of service kits sold for each device model. The end user can customize most fastener models without waiting for a service technician to arrive. We have instructions section in”Technical Support” on our dedicated website. For any questions, call our company at 608-831-2396 or 866-352-7108.

    If you have recently installed a pre-printer or have replaced the fuser within the last few months, here are the instructions for coding these fuser tabs on your personal LaserJet 4000, 4100, 4200, 4300, 4250, 4350:

    a printer

    Switch off and remove the fuser. Turn the machine over onto the gears (but on the left side) and press the tab on the fusing unit to make sure it is fully latched as shown below.

    How do you fix a 50.2 fuser error?

    As a workaround, you can try and turn off the individual printer again for the second time. Sometimes restarting allows the fuser to reboot and users may still print a few more blog pages. If you’re getting the 50.2 Fuser, slow error again, it’s time to get rid of your fuser.

    Then turn our lock in the straight section (the side without the prong), push down and around the other tab of the lock to make sure it is also completely inside the area you clicked on.

    What causes fuser error in HP printer?

    This error may appear when the fuser temperature becomes high. Follow the steps below to turn off the machine and let the fuser cool down by resuming before printing. You press the power button to turn off the printer. Disconnect the dedicated power cord from the back of the printer.

    While pressing the tab, reinsert the fuser unit and pass through it. If error 50.2 is resolved, do not replace the current fuser unit.

    hp 4200 fuser error code

    Common Fuser

    How do I fix a fuser error on my HP printer?

    Press the Power button to turn on the printer.Disconnect the power cord from the back of the printer.wait ten meters, that’s a few seconds, then connect the recompression cable.Press the Power button to turn on the printer. Then wait for all products to start up.Try printing again.


    Bugs is a large number of common bugs merge with suggestions and possible fixesone way.

    Related LaserJet LaserJet models:

    HP 4200

    HP LaserJet 4240

    HP 4250

    HP Laserjet 4300

    HP Laser Printing

    HP Laserjet 4350 4345mfp

    Control panel message:
    50. FIX BUG
    Need code help?

    Combine Checkout Errors X – Description Merge failed 50.1 Low melting point
    50. fixed 2 bugs 50 warm-up error 3 High Fuser Melting temperature error Merge failed 50.4 Merge failed Merge error 50.5 Wrong fuser installed 50.Merge error Melting circuit 6 open

    Corrective measures

    1 Recycle your device to truly enable printing on your device.

    2 Make sure the correct model combination is set. Make sure

    3 corresponding block of installed voltage fuses.

    4 Reinstall this fuser unit and check the connection between the fuser unit and the printer. Replace the plug if it is damaged.

    5 Replace the fuser unit.

    What should be check for a fuser error?

    If you recently moved this printer orinstalled a new fuser this morning, especially the hp LaserJet 4000, 4050, 4200 4100, or 4300 series printers, you should make sure there are usually two trays on the fuser unit. (They may come loose during transportation, heavy moving or installation of the welding machine. appropriate )

    6 Replace the DC controller printed circuit boards. matrix Replace

    hp 4200 fuser error code

    Total 7 au power supplies (LVPS). Take

    for on-site consultation

    Customer service team

    Call toll-free (888) 276-4666

    To schedule an on-site service visit online

    Digital Messages
    Printer When resolving photo printer messages, follow all of the steps listed, in the order listed, until the message is considered resolved.
    Control Panel
    Description Message Recommended Action < br>
    10.XX.YY SUPPLY10.XX.SUPPLY yy MEMORY error or 10.XX.YY SUPPLY ERROR memory Press
    for help follow the correct page of the cartridge.
    XX Description
    00 Possibility of logging errors in the cartridge
    Storage device 10 not found
    JJ Description
    00 black cartridge
    < br> 1 Open the top cover, remove the cartridge, then inserthim again. See print cartridge.
    2 Insert a new HP print cartridge.
    3 Check the connection between the DC controller PCA J97) (position and memory chip on paper (cartridge position J600).
    4 Replace the memory cables chip pin and assembly.
    Replace 5 CC PCA controller.See CC PCA operator.
    help, press 13 alternately with Cancel Top Sheet or AND 13.XX.YY DOUBLE SIDE JOB ABORTED both Cancel Top Sides and print sheets

    A duplex print job was physically interrupted because paper was temporarily ejected during duplex printing Grasp the edge of the page using the top output tray during duplex printing.Press 1
    ( HELP button) for more information en.
    Remove 2 multiple specified pages from the output tray. press the SELECT button) to continue printing ng.
    10 Replace the front rear unit with the side.
    5 Replace each controller DC PCA. See DC controller PCA.

    note jam, if RECOVERY means OFF, some pages are requiredo will be reprinted. Resend missing pages.

    13.XX.YY JAM For help, press:
    A misfeed has occurred using media path Is 1 Press HELP ( button) for details on clearing a paper jam.

    Previous post Помогите подготовить сервисное исправление ошибки 120 Error
    Next post Melhor Maneira De Corrigir Quais Endereços De E-mail São Armazenados No Outlook 2010