What To Do With I/O Board Error When LAN Is Not Ready?

If you’re getting the “i/o card is not ready for LAN” error, today’s blog post should help.

  • HP Error 2055dn Laserjet B0605

    HP error 2055dn Laserjet B0605. I need advice on troubleshooting this error. I tried to use the site but it doesn’t work anymore.


    Please refer to this insurance coverage to resolve an issue with where you can find an error message with this printer…

    HP LaserJet P2050 series printers – B0601, B0602, B0603, B0604, B0605, or POP errors when initializing this particular printer

  • LaserJet Pro 200 M27: LAN Error 79 LaserJet Pro 200 Color MFP M276nw

    Hello. I’ve been digging through all the posts related to all 79 bugs on the Strawberry forum, it doesn’t help.

    I have updated any current firmware. There is no print job in the queue. Power supply The power cable connects directly to industrial flour, without an inverter…

    It worked fine when I installed the printer a few weeks ago or when, but now that the print service is enabled, it starts: 79 – restart – error 79 1) restart due to error, etc.

    This seems to be due to each of us being connected to a local network. If service printing is in wireless mode, everything will work fine.

    Any ideas? Thanks


    i/o card not ready lan error

    Hi, I looked through your post and saw that unfortunately you are facing error 79 when using an ethernet connection. I would really help you.

    If you manually set my printer’s IP address, make sure it is outside the DHCP range of any router. I saw that it should have started from another post I came across before.

    If you’re still having problems, reset your printer to default settings and use autofocus on the IP address assigned by the manufacturer to see if that helps.

    Try disabling IPv6 on the printer to see if that makes a difference. Go to Settings, Configuration, Network, IPv6 Services and disable it.

    If everyone appreciates my efforts, please click the next thumbs up button below.

    i/o card not ready lan error

    If there’s anything else I can do to help, please let me know. Thank you.

  • LaserJet MFP M1132∷ Error on MFP e3 M1132


    Please help, I’ll getI can’t get the E3 error even though I just replaced the cartridge, checked the package was clean, cleaned the inside of the device, unplugged it and plugged it back in several times.

    Is there a way to reset the settings?

    Thank you

    Please. E3 When you see a paper jam indication (may make sense given the music in your description), try the procedure described here: Clearing Paper Jams for the HP LaserJet Pro M1130 and LaserJet Pro M1210 MFPs.

    If some of the problems persist, it would be best if you give us a call.

    What you can do is use the following link to create a case number yourself and then call them to speed up the beauty process:

    Step 1: Open the link: www.hp.com/contacthp/

    Step 2. Enter a product number or even select “Auto Detect”.
    Step 3. Scroll down to “Need help? Need more information? Fill out the form to select contact options.”
    Step 4. Scroll down and click: Contact HP Options – Get Click Phone Number

    Displays the case number and contact number.

  • LAN error on international (Tecra A2)

    My Tecra A2 gives me an error message that says zcfgsvc.exe might be doing something wrong.
    As a result, while my Wi-Fi is on, these people manage to connect me to the service, and then it gives me most of the error messages. If the stream is detached, I still get this message.

    Does anyone know what the problem is and how to fix it?
    Searching for all drivers just doesn’t give a real answer.



    ZCfgSvc.exe is part of the Intel Adapter Proset Utility Wireless. It comes without driver installation and is included in the OEM installation on laptops with Intel Cintrino technology.
    In my opinion, you should try downloading and creating a newer wireless network driver.

    You can search it online at Toshiba website.
    http://EU.computers.Toshiba-Europe.com and then download and download Vehicle Operator Support


  • Was Ist Eigentlich Mit Einem I/O-Plank-Fehler Zu Tun, Wenn Das LAN Nicht Bereit Ist?
    Vad Ska Man Göra Utrustad Med I/O-kortfel När LAN Utan Tvekan Inte är Redo?
    LAN이 준비되지 않은 상태에서 I/O 보드 오류를 처리하려면 어떻게 해야 하나요?
    O Que Fazer Com O Erro Da Placa De E/S Quando A LAN Não Está Pronta?
    ¿Qué Hacer Con El Error De La Placa De E/S Cuando La LAN Está Realmente Lista?
    Cosa Fornire In Caso Di Errore Della Scheda I/O Quando La LAN Non è Pronta?
    Co Zrobić W Przypadku Błędu Płyty We/wy, Gdy Sieć LAN Nie Byłaby Gotowa?
    Que Faire En Cas D’erreur D’E/S Lorsque Le LAN N’est Pas Prêt ?
    Что делать с ошибкой платы ввода-вывода, когда локальная сеть обычно не готова?
    Wat Te Doen Met I/O-kaartfout Wanneer LAN Niet Langer Gereed Is?

    Previous post Durante La Risoluzione Dei Problemi, Controlla Che Il Debug Infranga Le Regole In Modo Semplice
    Next post Was Ist Eigentlich Mit Einem I/O-Plank-Fehler Zu Tun, Wenn Das LAN Nicht Bereit Ist?